Show simple item record

contributor authorYou Wang
contributor authorHaohua Chen
contributor authorJingpei Li
contributor authorDe’an Sun
date accessioned2022-02-01T21:52:20Z
date available2022-02-01T21:52:20Z
date issued9/1/2021
identifier other%28ASCE%29GM.1943-5622.0002121.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4272201
description abstractIn this paper, a semianalytical approach is presented to formulate an excavated cavity in Mohr–Coulomb soils subject to biaxial initial stresses. The response of cavity expansion within the plastic region was investigated by combining the Mohr–Coulomb criterion with the equilibrium equation. The elastic–plastic (EP) boundary was expressed by a new conformal mapping function with three unknown parameters, which were determined by the stress continuity condition at the EP boundary and the volume-conservation condition. In the elastic zone, the stress function was expanded into Fourier series for convenience of application and the coefficients of Fourier series were determined according to stresses at the EP boundary. An unassociated flow rule with a dilation angle of 0° was adopted in the plastic zone, and Hooke’s law governed the behavior of soil within the elastic zone. Comparisons between the proposed solution and Galin’s solution showed good agreements, which validates the proposed framework. Extensive parametric studies were also performed to explore the effects of the internal friction angle, cohesion, and coefficient of earth pressure at rest on responses of cavity expansion. The results suggested that an increase of the internal friction angle, cohesion, Young’s modulus of soil, and coefficient of earth pressure at rest all leads to a higher expansion pressure at the cavity wall, while the extent of the plastic region around the cavity shrinks with an increase of the aforementioned three parameters.
publisherASCE
titleAnalytical Solution to Cylindrical Cavity Expansion in Mohr–Coulomb Soils Subject to Biaxial Stress Condition
typeJournal Paper
journal volume21
journal issue9
journal titleInternational Journal of Geomechanics
identifier doi10.1061/(ASCE)GM.1943-5622.0002121
journal fristpage04021152-1
journal lastpage04021152-11
page11
treeInternational Journal of Geomechanics:;2021:;Volume ( 021 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record