Show simple item record

contributor authorDimitrios C. Rakopoulos
contributor authorConstantine D. Rakopoulos
contributor authorEvangelos G. Giakoumis
contributor authorGeorge M. Kosmadakis
date accessioned2022-02-01T21:51:27Z
date available2022-02-01T21:51:27Z
date issued10/1/2021
identifier other%28ASCE%29EY.1943-7897.0000780.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4272172
description abstractThis work presents the development and use of a comprehensive, quasi-dimensional, two-zone combustion model aiming at predicting the combustion characteristics, performance, nitric oxide (NO), and carbon monoxide (CO) emissions of high-speed spark-ignition (SI) engine. The model is validated against pertinent data from experimental investigation conducted at the authors’ laboratory on experimental, Ricardo E6, mono-cylinder, high-speed SI engine, having the capability to operate over a wide range of compression ratios (CR) (variable compression ratio engine, VCR) and (fuel-air) equivalence ratios (EQR). In this work, a comparison between experimental and computational results is carried out for the engine fueled with gasoline, operated under various CR and EQR values at wide open throttle (WOT) position. The developed model is a two-zone one consisting of an unburned and a burned zone. It simulates the combustion process by following closely the flame front movement and development in the combustion chamber, at each instant of time, taking into account the history of pressure, temperature, and local composition. The unburned mixture turbulent entrainment into the burning zone through the flame front area is considered with its subsequent combustion. The flame front movement determines also the wetted areas and the volumes in the two zones. To determine the concentration of the chemical species equilibrium model is employed, while pertinent chemical kinetics schemes are used for computing NO and CO concentrations. The obtained pressure, mass fraction burned (MFB), mass fraction entrained (MFE), temperatures in the two zones, and NO and CO histories assist in the understanding of the complex phenomena involved, while they facilitate the interpretation of performance indices and knocking tendency. They shed light into the underlying physical and chemical mechanisms influencing the related SI engine performance and emissions attributes. The computed results are found to be in good agreement with the respective experimental ones.
publisherASCE
titleNumerical and Experimental Study by Quasi-Dimensional Modeling of Combustion and Emissions in Variable Compression Ratio High-Speed Spark-Ignition Engine
typeJournal Paper
journal volume147
journal issue5
journal titleJournal of Energy Engineering
identifier doi10.1061/(ASCE)EY.1943-7897.0000780
journal fristpage04021032-1
journal lastpage04021032-22
page22
treeJournal of Energy Engineering:;2021:;Volume ( 147 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record