Show simple item record

contributor authorMarcos C. Palu; Pierre Y. Julien
date accessioned2019-03-10T12:13:23Z
date available2019-03-10T12:13:23Z
date issued2019
identifier other%28ASCE%29HY.1943-7900.0001582.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4255134
description abstractThe collapse of the Fundão tailings dam in Brazil spilled 32 million cubic meters of mine waste, causing a severe socioeconomic and environmental impact in the Doce River. Approximately 90% of the spilled volume settled on floodplains, over 118 km downstream of Fundão Dam. A hyperconcentrated flow (≈400,000  mg/L) reached the Doce River, where the floodwave and sediment wave traveled at different celerities over 570 km until the Atlantic Ocean. The one-dimensional advection-dispersion equation with settling was solved and calibrated to fit the observed concentration using an analytical solution to determine the longitudinal dispersion coefficient and the settling rate, both along the river and in the reservoirs. The longitudinal dispersion coefficient ranged from 30 to 120  m2/s, and the sediment settling rate corresponded to particle sizes from 1.1 to 2.0 μm. Moreover, simulations with the calibrated model revealed that without the presence of three hydropower reservoirs on the Doce River, the sediment concentration at the watershed outlet would have been 64,000  mg/L instead of the observed 1,500  mg/L. The temperature effects were also examined, and a decrease from 30°C to 5°C in water temperature would have caused a concentration 12 times higher at the outlet.
publisherAmerican Society of Civil Engineers
titleModeling the Sediment Load of the Doce River after the Fundão Tailings Dam Collapse, Brazil
typeJournal Paper
journal volume145
journal issue5
journal titleJournal of Hydraulic Engineering
identifier doi10.1061/(ASCE)HY.1943-7900.0001582
page05019002
treeJournal of Hydraulic Engineering:;2019:;Volume ( 145 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record