Show simple item record

contributor authorYuanfang Cheng
contributor authorLong Jiang
contributor authorHuaidong Wang
contributor authorUbedullah Ansari
contributor authorZhongying Han
contributor authorJiping Ding
date accessioned2017-12-30T12:57:30Z
date available2017-12-30T12:57:30Z
date issued2017
identifier other%28ASCE%29GM.1943-5622.0001022.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4243891
description abstractThe most striking feature of liquid nitrogen (LN2) fracturing is to drastically reduce the temperature around the rock when LN2 is injected into the reservoir. The strong thermal gradient can significantly induce the internal thermal stress of the rock, which results in severe damage. In this study, the permeability, ultrasonic wave, and triaxial compression test were performed to investigate the influence of LN2 treatment on pore structure and mechanical properties of stratified coal. In the pore structure tests, the increasing range of permeability of LN2-treated samples is 100.3–149.6%, and the P-wave velocity decreases by 3.1–4.6%. In the triaxial compression tests, the compressive strength and elastic modulus of LN2-treated samples decrease by 11–39.6% and 18.2–32.1%, respectively. The experimental results indicate that LN2 treatment increases the connectivity of coal pores, improving its flow conductivity and permeability, which can effectively enhance the fracturing effect. Meanwhile, it also reduces the ability of coal to resist deformation and rupture, which contributes to the reduction of initiation pressure in the reservoir simulation. In addition, the analysis further suggests that the super low temperature thermal stress can greatly promote the generation of secondary cracks and the formation of complex fracture networks inside coal. The study provides an important reference for tight reservoir simulation of cryogenic fracturing.
publisherAmerican Society of Civil Engineers
titleExperimental Study on Pore Structure and Mechanical Properties of Stratified Coal
typeJournal Paper
journal volume17
journal issue12
journal titleInternational Journal of Geomechanics
identifier doi10.1061/(ASCE)GM.1943-5622.0001022
page04017116
treeInternational Journal of Geomechanics:;2017:;Volume ( 017 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record