| description abstract | he role of horizontal model grid resolution on the development of the daytime boundary layer over mountainous terrain is studied. A simple idealized valley topography with a cross-valley width of 20 km, a valley depth of 1.5 km, and a constant surface heat flux forcing is used to generate upslope flows in a warming valley boundary layer. The goal of this study is to investigate differences in the boundary layer structure of the valley when its topography is either fully resolved, smoothed, or not resolved by the numerical model. This is done by performing both large-eddy (LES) and kilometer-scale simulations with horizontal mesh sizes of 50, 1000, 2000, 4000, 5000, and 10 000 m. In LES mode a valley inversion layer develops, which separates two vertically stacked circulation cells in an upper and lower boundary layer. These structures weaken with decreasing horizontal model grid resolution and change to a convective boundary layer over an elevated plain when the valley is no longer resolved. Mean profiles of the LES run, which are obtained by horizontal averaging over the valley show a three-layer thermal structure and a secondary heat flux maximum at ridge height. Strong smoothing of the valley topography prevents the development of a valley inversion layer with stacked circulation cells and leads to higher valley temperatures due to smaller valley volumes. Additional LES and ?1 km? runs over corresponding smoothed valleys reveal that differences occur mainly because of unresolved topography and not because of unresolved turbulence processes. Furthermore, the deactivation of horizontal diffusion improved simulations with 1- and 2-km horizontal resolution. | |
