Show simple item record

contributor authorPing Dong
date accessioned2017-05-08T21:10:47Z
date available2017-05-08T21:10:47Z
date copyrightMay 2007
date issued2007
identifier other%28asce%290733-950x%282007%29133%3A3%28238%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/41685
description abstractThe bed sediments in most rivers and estuaries usually consist of mixtures of sand and mud formed by silt and clay particles. Past studies of mud have focused mainly on the cohesive properties of the mud due to the presence of clay particles. Only limited attention has been given to the erosion behavior of mixtures of sand and noncohesive silt particles. Although a number of experiments have shown that the presence of silt particles in predominantly sand bed results in an increase in the critical shear stress of sand fraction, the mechanism responsible for this change is not clear and no general formula is available for prediction. In this note a simple two-fraction formulation is presented for determining the relative critical shear stress of sand fraction in a noncohesive sand-silt mixture. The formulation is broadly consistent with the mechanism that the presence of silt causes the changes in bed roughness with corresponding reduction of shear stress exerted on the sand particles. The calculated relative critical shear stresses for the sand fraction at varying silt contents and the mean silt particle sizes show good agreement with the available experimental data.
publisherAmerican Society of Civil Engineers
titleTwo-Fraction Formulation of Critical Shear Stresses for Sand and Silt Mixtures
typeJournal Paper
journal volume133
journal issue3
journal titleJournal of Waterway, Port, Coastal, and Ocean Engineering
identifier doi10.1061/(ASCE)0733-950X(2007)133:3(238)
treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;2007:;Volume ( 133 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record