Show simple item record

contributor authorAdrian T. Hanson
contributor authorBrian Dwyer
contributor authorZohrab A. Samani
contributor authorDon York
date accessioned2017-05-08T21:10:39Z
date available2017-05-08T21:10:39Z
date copyrightSeptember 1993
date issued1993
identifier other%28asce%290733-9372%281993%29119%3A5%28825%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/41609
description abstractEfforts are being made to devise technologies and treatment systems to remediate contaminated soil on site without generating significant wastes for off‐site disposal. Heap leaching, a technique used extensively in the mining industry, has been investigated as a method for remediation of hazardous metal contamination of the vadose zone. In the mining industry, metal bearing ore is excavated and mounded on a pad. The metals are removed by passing a special leaching solution through the ore. In this study, the removal of Chromium (VI) from four New Mexico soils (sand, sandy loam, and clay) using heap leaching was evaluated at a column scale. The heap leaching study demonstrated greater than 99% removal of Cr(VI), using tap water as the leaching agent. The soils were typical of arid climate soils with low organic content (<1%).
publisherAmerican Society of Civil Engineers
titleRemediation of Chromium‐Containing Soils by Heap Leaching: Column Study
typeJournal Paper
journal volume119
journal issue5
journal titleJournal of Environmental Engineering
identifier doi10.1061/(ASCE)0733-9372(1993)119:5(825)
treeJournal of Environmental Engineering:;1993:;Volume ( 119 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record