Show simple item record

contributor authorMichael Pfister
contributor authorWilli H. Hager
contributor authorHans-Erwin Minor
date accessioned2017-05-08T20:45:34Z
date available2017-05-08T20:45:34Z
date copyrightAugust 2006
date issued2006
identifier other%28asce%290733-9429%282006%29132%3A8%28850%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/26159
description abstractThe upstream reach of stepped spillway flows may become prone to cavitation damage for large specific discharges because of the absence of air close to its bottom, until the point of bottom self-aeration is reached. This study considers the effect of two aerator types located at the first vertical step face to add air to the chute bottom. Compared to standard stepped spillway flow, considerable differences may be observed closely downstream of the aerator, whereas no significant deviations occur in the far-downstream chute reach. The characteristics of bottom air concentration curves on stepped chutes are investigated with an experimental approach. The results are then compared with flows on both smooth chutes and standard stepped chutes. The data analysis results in design equations that may be applied to usual stepped spillways of chute angles around
publisherAmerican Society of Civil Engineers
titleBottom Aeration of Stepped Spillways
typeJournal Paper
journal volume132
journal issue8
journal titleJournal of Hydraulic Engineering
identifier doi10.1061/(ASCE)0733-9429(2006)132:8(850)
treeJournal of Hydraulic Engineering:;2006:;Volume ( 132 ):;issue: 008
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record