Search
Journal of Aerospace Engineering
EISSN: 1943-5525
ISSN: 0893-1321
Priority: 6
Publisher: American Society of Civil Engineers
Description: The Journal of Aerospace Engineering promotes the implementation and development of space and aerospace technologies and their transfer to other civil engineering applications. Topics of interest include aerodynamics, computational fluid dynamics, wi More ...
Now showing items 1-5 of 5
Flexure of Concrete Beams Reinforced with Advanced Composite Orthogrids
Publisher: American Society of Civil Engineers
Abstract: An experimental investigation was conducted to determine the flexural characteristics of advanced composite grid reinforced-concrete structures. Concrete beams reinforced with orthogonal grids composed of corrosion-resistant ...
Mechanical Characterization of a Graphite/Epoxy IsoTruss
Publisher: American Society of Civil Engineers
Abstract: Graphite/epoxy IsoTruss specimens were filament wound and experimentally tested to failure under simple compression, tension, and torsion and compared with simple analytical predictions. Failed specimens were subsequently ...
Influence of Residual Strains on Buckling of Thin Filament-Wound Cylinders in Axial Compression
Publisher: American Society of Civil Engineers
Abstract: This paper describes a method for improving the accuracy of buckling predictions of thin-shell, filament-wound cylinders under axial compression loads using enhanced finite-element models. This is accomplished by incorporating ...
Influence of Fiber Undulations on Buckling of Thin Filament-Wound Cylinders in Axial Compression
Publisher: American Society of Civil Engineers
Abstract: The filament-winding process introduces inherent geometric defects into thin-shell cylinders in the form of fiber-bundle, or tow, crossovers. This research identified the micromechanical geometry in the fiber crossover ...
Implementing Optimization Methods in the Design of IsoTruss Structures in Uniaxial Compression
Publisher: ASCE
Abstract: This study examines two techniques to optimize the design of lightweight composite IsoTruss columns subject to uniaxial compression: gradient-based (interior-point with algorithmic differentiation and Latin hypercube ...