Search
CSV
RISInvestigating the Mixing Efficiencies of Liquid-to-Liquid Chemical Injection Manifolds for Aquatic Invasive Species Management
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Aquatic invasive species (AIS) have spread throughout the United States via major rivers and tributaries. Locks and dams positioned along affected waterways, specifically lock chambers, are being evaluated as potential ...
Erratum: “Revisiting the ASME Pressure–Viscosity Report Using the Tait-Doolittle Correlations” [ASME J. Tribol., 2021, 143(6), p. 061901DOI: 10.1115/1.4048605]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Table 3 should be corrected as shown below to list a reference temperature of 311 K which was used throughout the Zolper et al. [1] manuscript. The fit parameters in the table are unchanged.The authors originally used ...
Modeling Polysiloxane Volume and Viscosity Variations With Molecular Structure and Thermodynamic State
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Siloxanebased polymers (polysiloxanes) exhibit a range of volume, viscosity, and pressureviscosity behaviors that are strongly influenced by the macromolecular structure. In this report, a combination of extant rheological ...
Correlation of Polysiloxane Molecular Structure to Shear Thinning Power Law Exponent Using Elastohydrodynamic Film Thickness Measurements
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Siloxanebased polymers (polysiloxanes) are susceptible to temporary shearthinning that manifests as a reduction of elastohydrodynamic film thickness with increasing entrainment speed or effective shear rate. The departure ...
Investigation of Shear-Thinning Behavior on Film Thickness and Friction Coefficient of Polyalphaolefin Base Fluids With Varying Olefin Copolymer Content
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study investigates the rheological properties, elastohydrodynamic (EHD) film-forming capability, and friction coefficients of low molecular mass poly-α-olefin (PAO) base stocks with varying contents of high molecular ...