Search
Now showing items 1-10 of 14
Block Planning Based on Grid’s Topology for the Dismantling of Long-Span Spatial Lattice Structures
Publisher: American Society of Civil Engineers
Abstract: The demolition issue of long-span spatial lattice structures has become increasingly prominent with the rapid urban development and building upgrades. Building deconstruction offers superior economic and environmental ...
Shear Lag in Bolted Angle Tension Members
Publisher: American Society of Civil Engineers
Abstract: Steel angles acting in tension can be used singly or in pairs. In either case, it is not usually possible to connect both legs. This means that the effectiveness of the member must reflect the shear lag that is present in ...
A Method for the Preliminary Geometric Design of Gear Tooth Profiles With Small Sliding Coefficients
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper proposes a method of the preliminary geometric design for gear tooth profiles based on given sliding coefficients. A design procedure is developed and a simplified derivation of the ...
Modeling of Grout Returned Height for Postgrouting at Pile Tip Considering the Soil Unloading and Time-Dependent Behavior of Cement Viscosity Effects
Publisher: ASCE
Abstract: Postgrouting at the pile tip can improve the behavior of pile shaft resistance through the grout returned along the pile shaft. The soil radial unloading effect that existed in the bored pile shaft soil and the cement ...
Theoretical and Experimental Study on Elastic–Plastic–Sliding Load Transfer Model for Pile Tip and Pile Side Postgrouting Piles
Publisher: American Society of Civil Engineers
Abstract: An elastic–plastic–sliding trilinear load transfer model is established for grouted piles. This model summarizes the resistance–displacement relationships at both the side and tip of the pile, describing the transition ...
Theoretical Analysis of Pile Tip and Pile Side Compaction Grouting and Grout Diffusion Height Considering Unloading Effect
Publisher: American Society of Civil Engineers
Abstract: This study introduces a unified cylindrical and spherical cavity reverse expansion model to simulate the formation of compaction grouting bodies and grout diffusion along pile shafts. Stress field expression employs the ...
Effects of Free-Stream Turbulence and Reynolds Number on the Aerodynamic Characteristics of a Semicylindrical Roof
Publisher: American Society of Civil Engineers
Abstract: The influences of free-stream turbulence and Reynolds number on the aerodynamic characteristics of a semicylindrical roof have been investigated experimentally under uniform flow conditions. Grids were used to generate ...
An Introduction of a Novel Friction Drive: Metal Belt Drive With Magnets
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A novel friction drive—a metal belt drive with magnets (MBDM)—is proposed in this paper, and its structure and principle are introduced. Based on theories of friction drive and electromagnetism, ...
Salt-Frost Resistance Performance of Airfield Concrete Based on Meso-Structural Parameters
Publisher: American Society of Civil Engineers
Abstract: Airport cement pavement is prone to severe freeze–thaw damage due to the use of deicing chemicals. There is no unified evaluation parameter for analyzing the relationship between the concrete meso-structure and its salt-frost ...
Evaluating the eastward propagation of the MJO in CMIP5 and CMIP6 models based on a variety of diagnostics
Publisher: American Meteorological Society