Abstract: Flow boiling of HFE 7000 in five parallel microchannels of 222 μm hydraulic diameter, each containing a single row of 24 in-line 100 μm pin fins, was investigated. High speed photography ...

Abstract: Flow boiling of 1-methoxyheptafluoropropane (HFE 7000) in 222 μm hydraulic diameter channels containing a single row of 24 inline 100 μm pin fins was studied for mass fluxes from 350 kg/m2 s ...

Abstract: A parametric study was performed to reveal the hydrodynamic processes controlling crossflow over MEMS-based micro pin fin devices. Pressure drop experiments were conducted and used to obtain ...

Abstract: The inception of leading-edge sheet cavitation on two-dimensional smooth thin hydrofoils at low to moderately high Reynolds number flows is investigated by an asymptotic approach and numerical ...

Abstract: Pressure drops and friction factors associated with the forced flow of de-ionized water over staggered and in-line circular/diamond shaped micro pin-fin bundles 100μm long with hydraulic diameter ...

Abstract: The heat transfer performance of two microjet arrays was investigated using degassed deionized water and air. The inline jet arrays had diameters of 54 μm and 112 μm, a spacing of 250 μm, ...

Abstract: An investigation of the pressure drop and impingement zone heat transfer coefficient trends of a single-phase microscale impinging jet was undertaken. Microelectromechanical system (MEMS) processes ...

Abstract: An experimental study of two-phase heat transfer coefficients was carried out using R134a in uniformly heated horizontal circular microtubes with diameters from 0.50 mm to 1.60 mm over a range ...

Abstract: A detailed experimental study was carried out on the critical heat flux (CHF) condition for flow boiling of R134a in single circular microtubes. The test sections had inner diameters (ID) of ...