Search
CSV
RISThe Effect of Melting on Forced Convection Heat Transfer
Publisher: American Meteorological Society
Abstract: The effect of melting on convective heat transfer between a melting body and surrounding fluid was studied quantitatively from the point of view of boundary layer theory, film theory and penetration theory. These studies ...
Erratum: “Low Speed Model Testing Studies for an Exit Stage of High Pressure Compressor†[ASME Journal of Engineering for Gas Turbines and Power, 2014, 136(11), p. 112603, DOI: 10.1115/1.4027637]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Figures 12 and 13 on page 6 of the original manuscript contain some errors. The correct figures are as follows:
Low Speed Model Testing Studies for an Exit Stage of High Pressure Compressor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper discusses detailed experimental studies of a lowspeed largescale axial compressor, which is typical of an exit stage of HPC. Numerous measuring techniques were performed, and detailed experimental results were ...
Structure Optimization and Cooling Performance of a Heat Sink With Discontinuous Triangular Ribs Impacted by Hybrid Nanofluid Confined Slot Jet Impingement
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Due to the increased use of high heat flux electronic equipment, improving the heat transfer capacity and surface temperature uniformity of heat sinks have become a major concern. In this study, a novel confined slot jet ...