Search
Now showing items 1-10 of 57
The Effect of Misalignment on the Life of High Speed Cylindrical Roller Bearings
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper describes an analytical investigation of the effects of misalignment and shaft speed on cylindrical roller bearing performance. Numerical results are presented for the contact load ...
Boundary Effects in Wake Flow
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Analytical solutions are obtained for the problem of boundary effects on the fully developed wake (or cavity) behind an inclined flat plate at an arbitrary angle of attack. The investigation ...
Analysis of Tapered Roller Bearings Considering High Speed and Combined Loading
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents an analytical study of the load distribution in a tapered roller bearing operating at a high speed and under combined loading. The friction forces at the rolling contacts ...
Discussion: “Dynamic Life Estimation for Track Surfaces under Periodic Loadings and Nonuniform Backup Supports” (Hartnett, M. J., and Palazotto, A. N., 1976, ASME J. Lubr. Technol., 98, pp. 602–606)
Publisher: The American Society of Mechanical Engineers (ASME)
The Mechanisms of Determining Shock Locations in One and Two Dimensional Transonic Flows
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The mechanism that locates a shock wave in a transonic flow in one and two dimensions is examined. It is found that in one dimension the shock is located by specifying the downstream pressure ...
Flat-Crush Failure Mechanism of Corrugated Fiberboard
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper analyzes the behavior of corrugated fiberboard under flatcrush loading using the elastica theory. The analysis is useful for evluating the quality of the board as well as for studying ...
An Analysis of Deformation Characteristics and Interfacial Friction Conditions in Simple Upsetting of Rings
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Presented in this paper is an analytical investigation of the deformation characteristics at the outer equator and the change in diameter of the inner equator in simple upsetting of flat rings. ...
Upper-Bound Solutions of Some Axisymmetric Cold Forging Problems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A new velocity field for the forging of some cylindrical workpieces is presented taking into account the bulging of the free cylindrical surface during deformation. The velocity field is more ...
A Weibull Analysis of Wood Member Bending Strength
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The analysis of size effect on bending strength of rectangular wood beams based on Weibull’s theory of brittle failure has been expanded here to include tapered wood beams under arbitrary ...
Numerical Simulation of Droplet Size Distribution in Vertical Upward Annular Flow
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The liquid droplet size distribution in gas-liquid vertical upward annular flow is investigated through a CFD (computational fluid dynamics)-PBM (population balance model) coupled model in this ...