Abstract: An experiment was performed on the plastic deformation of mild steel S15C by applying combined loads to thin-walled tubular specimens so that the deformation developed along orthogonal trilinear ...

Abstract: The present paper is concerned with the analysis of the large elastoplastic deflection of a simply supported plate subjected to a uniform load. The analysis is performed under the assumptions ...

Abstract: Four kinds of creep constitutive models, i.e., strain-hardening, modified strain-hardening, kinematic-hardening, and mixed-hardening theory, are evaluated on the basis of creep-test results on type ...

Abstract: Proportional combined loading tests using axial load and torque were conducted on thin-walled tubular specimens of annealed isotropic aluminum alloy 5056. The experimental results showed that the ...

Abstract: To elucidate the plastic behavior of metals under out-of-phase strain cycles, a series of experiments was performed on square strain trajectories in a vector space of deviatoric strain by ...

Abstract: The stress-range and path-shape dependencies of multiaxial nonproportional cyclic hardening were studied for annealed type 316 stainless steel at 600°C by means of stress controlled tests. ...

Abstract: Interaction between creep and plastic deformation was studied experimentally for type 316 stainless steel at 650°C, with special emphasis on creep behavior subsequent to plastic prestraining. ...

Abstract: History effects of prior creep on subsequent plasticity were studied for type 316 stainless steel at 600°C under combined torsion and tension. Following each of three different amounts of ...

Abstract: Micro gas turbines (MGTs) are subject to certain problems, notably low thermal efficiency of the system and high emission including NOx. The chemically recuperated gas turbine (CRGT) system ...