Search
Now showing items 1-10 of 10
Effect of Circumferentially Nonuniform Lateral Tension on Bond Behavior between Plain Round Bars and Concrete: Analytical Study
Publisher: American Society of Civil Engineers
Abstract: The bond behavior between a plain bar and concrete has received more attention in recent years because of its importance in the assessment of historical structures. The negative effect of lateral tension on the bond ...
Bond-Slip Response of Plain Bars Embedded in Self-Compacting Lightweight Aggregate Concrete under Lateral Tensions
Publisher: American Society of Civil Engineers
Experimental Study on Bond Behavior of Deformed Bars Embedded in Concrete Subjected to Biaxial Lateral Tensile Compressive Stresses
Publisher: American Society of Civil Engineers
Abstract: The bond behavior of deformed reinforcing bars, which is important to the assessment and design of reinforced concrete structures, is greatly influenced by the stress state in concrete. Because the effect of biaxial lateral ...
Bond Behavior of Plain Round Bars Embedded in Concrete Subjected to Biaxial Lateral Tensile-Compressive Stresses
Publisher: American Society of Civil Engineers
Abstract: Owing to its importance to the assessment and design of reinforced concrete structures, the bond behavior of steel bars in concrete has been extensively studied. This paper presents an experimental investigation into the ...
Analytical Approach to Modeling the Effect of Transverse Reinforcements on the Bond Strength of Deformed Bars
Publisher: American Society of Civil Engineers
Abstract: The bond strength of deformed bars has been widely concerned owing to its importance in calculating development and/or splice lengths. Many database-independent analytical models were proposed to evaluate bond strength of ...
Analytical Approach to Modeling the Effect of Transverse Reinforcements on the Bond Strength of Deformed Bars
Publisher: American Society of Civil Engineers
Abstract: The bond strength of deformed bars has been widely concerned owing to its importance in calculating development and/or splice lengths. Many database-independent analytical models were proposed to evaluate bond strength of ...
Removal of Cr(III) Using Humic Acid–Modified Attapulgite
Publisher: American Society of Civil Engineers
Abstract: A novel modified attapulgite has been developed. The method is based on the modification of attapulgite with humic acid, and its application is for the removal of Cr(III) in different conditions. It is characterized using ...
Removal of Cr(III) Using Humic Acid–Modified Attapulgite
Publisher: American Society of Civil Engineers
Abstract: A novel modified attapulgite has been developed. The method is based on the modification of attapulgite with humic acid, and its application is for the removal of Cr(III) in different conditions. It is characterized using ...
Rapid Treatment of Mud Slurry Using a Vacuum-Assisted PHD and Solidification Combined Method
Publisher: ASCE
Abstract: Mud slurries are characterized by high water content and low strength; therefore, treatment (which included volume reduction and strength improvement in this study) was required before they could be transported, handled, ...