Search
Now showing items 1-10 of 940
Closure to “Discussion of ‘Properties of Extra Low Sulfur Engineering and Die Steels’” (1978, ASME J. Eng. Mater. Technol., 100, p. 223)
Publisher: The American Society of Mechanical Engineers (ASME)
An Experimental Determination of Losses in a Three-Port Wave Rotor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Wave rotors, used in a gas turbine topping cycle, offer a potential route to higher specific power and lower specific fuel consumption. In order to calculate this potential realistically, a ...
Prediction of Rotating Biological Contactor Efficiency Using TOC
Publisher: American Society of Civil Engineers
Abstract: The results of experiments treating high‐strength vegetable‐pickling waste in an experimental rotating biological contactor (RBC) are described. The relationships between TOC, BOD, and COD for the particular waste are ...
Large-Scale Passive Earth Pressure Load-Displacement Tests and Numerical Simulation
Publisher: American Society of Civil Engineers
Abstract: Passive earth pressure is recorded in two different tests, using a 6.7-m long, 2.9-m wide soil container. In these tests, sand with 7% silt content is densely compacted behind a moveable test wall to a supported height of ...
Dynamic Whip of Elastically Restrained Plate Strips to Rapid Transit Loads
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A plate strip of infinite length and constant width is cantilevered on a uniform elastic support along one edge and free along its opposite edge. A normal line load of constant intensity ...
Comparison of Dynamic Tear and Charpy-V-Notch Impact Properties of Plate Steels
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The increasing interest in the Dynamic Tear (DT) test for use in measuring the fracture resistance of steels in both quality control and research testing, invites a comparison to the commonly ...
The Influence of Inclusions on the Toughness and Fatigue Properties of A516-70 Steel
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The influence of inclusions on the tensile ductility, upper shelf Charpy-V-notch, dynamic tear and J-integral fracture toughness and the fatigue crack propagation behavior and the fatigue endurance ...
Fatigue Crack Propagation in A533B Steels
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The influence of steelmaking practice on the fatigue crack propagation behavior of A533B low alloy plate steels is examined. Conventional practice, calcium-treated and electroslag-remelted steels ...
CSV
RIS