Search
CSV
RISPatterned Microstructure Array Fabrication by Using a Novel Standing Surface Acoustic Wave Device
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper develops a novel standing surface acoustic wave (SAW) device with three pairs of interdigital transducers (IDTs) to fabricate the patterned microstructure arrays with the assistance of ultraviolet (UV) polymerization. ...
Projection-Based Continuous 3D Printing Process With the Grayscale Display Method
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The printing resolution and scale of projection-based 3D printing are affected by the pixel size and projected light power. An effective and versatile method to print complex constructs with high resolution and large area ...
Conformal Theoretical Modeling of Arbitrary Shape Flexible Electronic Sensors Mounted Onto General Curved Surface Substrates
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Stretchable and flexible electronic sensors have been attracted to novel applications due to their conformal integration onto complex curved surfaces, whereas the mounting strains generated by the geometric mismatch of ...
Conformal Theoretical Modeling of Arbitrary Shape Flexible Electronic Sensors Mounted Onto General Curved Surface Substrates
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Stretchable and flexible electronic sensors have been attracted to novel applications due to their conformal integration onto complex curved surfaces, whereas the mounting strains generated by the geometric mismatch of ...
Measurement of Thermal Field Temperature Distribution Inside Reaction Chamber for Epitaxial Growth of Silicon Carbide Layer
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Silicon carbide (SiC) has been widely utilized in the semiconductor industry for the development of high-power electrical devices. Using chemical vapor deposition to grow a thin epitaxial layer onto the SiC substrate surface ...
Silicone Based Tissue Mimicking Phantom for Needle Insertion Simulation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Siliconebased tissuemimicking phantom is widely used as a surrogate of tissue for clinical simulators, allowing clinicians to practice medical procedures and researchers to study the performance of medical devices. This ...
Study of Insertion Force and Deformation for Suturing With Precurved NiTi Guidewire
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This research presents an experimental study evaluating stomach suturing using a precurved nickel–titanium (NiTi) guidewire for an endoscopic minimally invasive obesity treatment. Precise path planning is critical for ...
Measurement of the Friction Force Inside the Needle in Biopsy
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Core needle biopsy (CNB) is widely used in active surveillance, which is the current standard of care for low risk prostate cancers. A longer biopsy sample length may improve the accuracy of diagnosis. To increase the ...
The Needle With Lancet Point: Geometry for Needle Tip Grinding and Tissue Insertion Force
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The grinding procedure and setup, the cutting edge inclination and rake angles of the needle with lancet point (NLP), and the NLP tissue insertion force are investigated in this paper. The NLP is the most commonly used ...