Search
Now showing items 1-7 of 7
Passive Mechanical Control With a Special Class of Positive Real Controllers: Application to Passive Vehicle Suspensions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents an efficient H2 optimization method for passive mechanical control problems with a special class of positive real controllers. In particular, the problem of designing passive vehicle suspensions based ...
Damage Identification of Continuous Girder Bridge’s Dynamic Behavior Based on Trust Region Algorithm
Publisher: American Society of Civil Engineers
Abstract: In view of trust region algorithm has good global convergence for solving non-linear quadratic programming problem, the effective elastic module’s damage factor and the damage distributed function was introduced by FEM ...
Compensation for the Residual Error of the Voltage Drive of the Charge Control of a Piezoelectric Actuator
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: One very effective approach to suppress hysteresis from the piezoelectric actuator is to use the charge control across the associated capacitance. The charge driver often uses an additional capacitor connected to the ...
A CloudSat Perspective on the Cloud Climatology and Its Association with Aerosol Perturbations in the Vertical over Eastern China
Publisher: American Meteorological Society
Abstract: any efforts have been taken to investigate aerosol?cloud interactions from space, but only a few studies have examined the response of vertical cloud structure to aerosol perturbations. Three-dimensional cloud climatologies ...
Cavitation Erosion of Cobalt Alloy Coatings Containing Tungsten Carbide Particles in Hydrochloric and Sulphuric Corrosive Media
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Cavitation erosion tests of composite coatings based on vacuum fusion sintered cobalt alloy containing tungsten carbide particles were carried out in 30 percent HCl and 50 percent H2 SO4 ...
Numerical Investigation of Effects of Blockage, Inclination Angle, and Hole-Size on Film Cooling Effectiveness at Concave Surface
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Film-hole can be often blocked by thermal-barrier coatings (TBCs) spraying, resulting in the variations of aerodynamic and thermal performances of film cooling. In this study, a numerical study of the blockage effect on ...
An Equivalent-Plane Cross-Coupling Position Control for Contour-Accuracy Improvement in Three-Axis Free-Form Contour Following Tasks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: To reduce the contouring errors in computer-numerical-control (CNC) contour-following tasks, the cross-coupling controller (CCC) is widely researched and used. However, most existing CCCs are well-designed for two-axis ...