Search
CSV
RISNumerical Study of Turbulent Heat Transfer and Pressure Drop Characteristics in a Water-Cooled Minichannel Heat Sink
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: With the rapid development of the Information Technology (IT) industry, the heat flux in integrated circuit (IC) chips cooled by air has almost reached its limit at about 100W∕cm2. Some ...
Three-Dimensional Numerical Study of Flow and Heat Transfer Enhancement Using Vortex Generators in Fin-and-Tube Heat Exchangers
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, a three-dimensional numerical investigation was performed for heat transfer characteristics and flow structure of full scale fin-and-tube heat exchangers with rectangular winglet ...
Erratum: “A Design and Rating Method for Shell-and-Tube Heat Exchangers with Helical Baffles” [ASME J. Heat Transfer, 2010, 132(5), p. 051802]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: There are some errors in Eq. 22, Table 1, and nomenclature. The corrections of these errors are shown below: Display FormulaS2z=0.5(B-Sp/cosβ)[D1-Ds+Ds-dott(tt-do)] (22) Do/Di in Table 1 should ...
Three-Dimensional Turbulent Flow in the Exit Head Section of a Heat Exchanger
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Measurements of three-dimensional turbulent flow in the exit head section of a shell-and-tube heat exchanger were performed using three-component laser Doppler velocimeter. The test geometry is ...
Thermal Modeling of Forced Convection in a Parallel-Plate Channel Partially Filled With Metallic Foams
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Fully developed forced convective heat transfer in a parallel-plate channel partially filled with highly porous, open-celled metallic foam is analytically investigated. The Navier–Stokes equation ...