Search
Now showing items 1-10 of 13
Influence of the Different Design Parameters to the Centrifugal Compressor Tip Clearance Loss
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper the effect of the tip clearance was studied with six different centrifugal compressors and data available in literature. The changes in the overall performance of the compressor stage were examined. The aim ...
Nonrealizability Problem With Quadrature Method of Moments in Wet-Steam Flows and Solution Techniques
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The quadrature method of moments (QMOM) has recently attracted much attention in representing the size distribution of liquid droplets in wet-steam flows using the n-point Gaussian quadrature. However, solving transport ...
Numerical Investigation of the Flow Behavior Inside a Supercritical CO2 Centrifugal Compressor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Centrifugal compressors are one of the best choices among compressors in supercritical Brayton cycles. A supercritical CO2 centrifugal compressor increases the pressure of the fluid which state is initially very close to ...
Comparison of Moment-Based Methods for Representing Droplet Size Distributions in Supersonic Nucleating Flows of Steam
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper investigates the performance of moment-based methods and a monodispersed model (Mono) in predicting the droplet size distribution and behavior of wet-steam flows. The studied moment-based methods are a conventional ...
Fuzzy Model for Real-Time Reservoir Operation
Publisher: American Society of Civil Engineers
Abstract: A fuzzy rule-based control model for multipurpose real-time reservoir operation is constructed. A new, mathematically justified methodology for fuzzy inference—total fuzzy similarity—is used and compared with the more ...
Acoustic Source Data for Medium Speed IC-Engines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Knowledge of the acoustic source characteristics of internal combustion engines (IC-engines) is of great importance when designing the exhaust duct system and its components to withstand the ...
Siloxanes as Working Fluids for Mini ORC Systems Based on High Speed Turbogenerator Technology
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents a study aimed at evaluating the use of siloxanes as the working fluid of a smallcapacity (≈10kWe) ORC turbogenerator based on the “highspeed technology†concept, combining the turbine, the pump, ...
Effects of Real Gas Model Accuracy and Operating Conditions on Supercritical CO2 Compressor Performance and Flow Field
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Rankine and Brayton cycles are common energy conversion cycles and constitute the basis of a significant proportion of global electricity production. Even a seemingly marginal improvement in the efficiency of these cycles ...
Centrifugal Compressor Design for Near-Critical Point Applications
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The supercritical CO2 (sCO2) Brayton cycle has been attracting much attention to produce the electricity power, chiefly due to its higher thermal efficiency with the relatively lower temperature at the turbine inlet compared ...
Numerical Investigation of Two-Phase Shock Waves in CO2 Flows Using a Modified Hertz–Knudsen Model
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Understanding the complex behavior of two-phase shocks in CO2 flows is essential for a variety of applications, including carbon capture and storage () and transcritical refrigeration cycles. This study presents a comprehensive ...
CSV
RIS