Search
Now showing items 1-4 of 4
Erratum: “Water-Heated Pool Boiling of Different Refrigerants on the Outside Surface of a Horizontal Smooth Tube” [ASME Journal of Heat Transfer, 2012, 134, 021502]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In the paper [1], the author presented heat transfer coefficients during pool boiling of five different refrigerants (R123, R245fa, R236fa, R134a, and R22) on the outside surface of a horizontal ...
Water-Heated Pool Boiling of Different Refrigerants on the Outside Surface of a Horizontal Smooth Tube
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Pool boiling heat transfer has been extensively studied over decades, but the effect of boundary heating conditions on boiling received little attention. In this work, heat transfer coefficients ...
Effects of Dissolved Air on Subcooled Flow Boiling of a Dielectric Coolant in a Microchannel Heat Sink
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effects of dissolved air in the dielectric liquid FC-77 on flow boiling in a microchannel heat sink containing ten parallel channels, each 500μm wide and 2.5mm deep, were experimentally ...
A Study of Critical Heat Flux During Flow Boiling in Microchannel Heat Sinks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The cooling capacity of two-phase transport in microchannels is limited by the occurrence of critical heat flux (CHF). Due to the nature of the phenomenon, it is challenging to obtain reliable ...