Search
Now showing items 1-6 of 6
Long-Life Notch Strength Reduction Due to Local Biaxial State of Stress
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An explanation for the observed difference between the values of the long-life, fatigue-notch strength-reduction factor (Kf ) and the elastic stress concentration factor based on the influence ...
The Effects of Material Strength, Stress Ratio, and Compressive Overload on the Threshold Behavior of a SAE1045 Steel
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The fatigue crack growth rate behavior of a SAE1045 steel in the as received condition and four different quenched and tempered conditions was studied as a function of stress ratio and peak ...
On the Relation Between Stress and Strain-Concentration Factors in Notched Members in Plane Stress
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The validity of the relationship between stress and strain-concentration factors proposed by Neuber, i.e., the geometric mean of the stress and strain-concentration factors is equal to the linear ...
Fatigue Crack Propagation of Short Cracks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Previous studies have shown that both threshold stress intensity factors and fatigue crack growth rates are dependent on crack size. The average growth rates for very short cracks considerably ...
Fatigue Life Predictions of Smooth and Notched Specimens Based on Fracture Mechanics
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An elastic plastic fracture mechanics solution for short fatigue cracks in smooth and notched specimens is presented which admits plasticity by replacing the conventional stress term with a ...
A Rational Approach for Designing Gray Iron Components
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Three suggested phases of improvement in the design methods for gray iron components are: (a) design based on accurate strength and deformation analyses, instead of the currently used elastic ...
CSV
RIS