Abstract: Calcium carbide residue (CCR) is a waste product from acetylene gas factories, which is rich in calcium hydroxide [

Abstract: An improvement of flexural strength of cement stabilized sand using polypropylene fibers designated as compacted cement-polypropylene fiber-sand (CCFS) is investigated in this research. The studied material performance of ...

Abstract: Calcium carbide residue (CCR) and fly ash (FA) are both waste products from acetylene gas factories and power plants, respectively. The mixture of CCR and FA produces a cementitious material because CCR contains a lot of

Abstract: Understanding of undrained shear behavior of cement admixed clay is of utmost importance for strength and deformation analyses in composite soft clay under short-term condition. From the critical analysis, the distinct ...

Abstract: The in situ deep mixing technique is an established means of enhancing bearing capacity and reducing settlement by placing columnar inclusions in soft ground. Developments in equipment and field techniques to implement ...

Abstract: Granulated blast-furnace slag (GBFS) is one of the by-products generated during the process of the extraction of iron from iron ore. In order to use this by-product in a more sustainable manner, in-depth knowledge of ...

Abstract: In the present study, a novel model is introduced for the prediction of a resilient modulus (MR) of cohesive subgrade soils considering cone-penetration test parameters to establish correlations with the MR. A reliable ...

Abstract: Recently, considerable risks to the internal instability of mechanically stabilized earth (MSE) walls have been encountered from the inadequate drainage capacity of some backfill under extremely heavy rainfall. Due to its ...

Abstract: Through the process of extracting iron from iron ore, a by-product is generated known as granulated blast furnace slag (GBFS). Traditional stabilization methods such as cement stabilization are not entirely sustainable ...