Abstract: Oil-in-water emulsions are widely used as lubricants/coolants in the ironing of beverage and food containers. This paper investigates this system, where the two phased flow problem presented by ...

Abstract: Over the past 10 years, a novel cellular solid, Trabecular MetalTM (TM), has been developed for use in the orthopedics industry as an ingrowth scaffold. Manufactured using chemical vapor ...

Abstract: This study examines the elastic recovery (springback) of a porous tantalum foam after sheet forming operations. The foam and sheet-like form is applicable to bone ingrowth surfaces on orthopedic ...

Abstract: In the current manufacturing processes for can making, a time consuming and therefore expensive process involves spraying a food-contact safe polymer coating onto the can interior before filling. ...

Abstract: The lubrication mechanisms with oil-in-water emulsions have been extensively investigated based on the measurements of film thickness and/or tractions in the past few decades. However, direct ...

Abstract: Aluminum forming processes such as rolling, extrusion, and ironing involve the transfer of large loads through a tooling/workpiece interface to plastically deform the workpiece to a desired shape. ...