Search
Now showing items 1-5 of 5
Heat Transfer Evaluation for a Two-Pass Smooth Wall Channel: Stationary and Rotating Cases
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study presents findings on combined effects of Reynolds number and rotational effect for a two-pass channel with a 180-deg turn, numerically and experimentally. To have a better understanding of the flow behavior and ...
Turning Guide Vane Effect on Internal Cooling of Two-Passage Channel With Parallel Ribs
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present work investigates the effects of various guide vane designs on the heat transfer enhancement of rotating U-duct configuration with parallel 45-deg ribs. The ribs were installed on the bottom wall of the channel, ...
Heat Transfer in Internal Cooling Channels of Gas Turbine Blades: Buoyancy and Density Ratio Effects
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: The present work investigates the effects of buoyancy and wall heating condition on the thermal performance of a rotating two-pass square channel with smooth walls. The U-bend channel has a square cross section with a ...
Optimization of Kaplan Hydroturbine at Very Low Head With Rim-Driven Generator
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: The objective of the paper is to study the design and optimization of Kaplan hydroturbines for a very low head (less than 3 m), with a particular emphasis on the use of rim-drive electrical generators. The work is based ...
Utilization of Hydroturbines in Wastewater Treatment Plants
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: Wastewater treatment plants (WWTPs) are a significant energy consumer, yet there are several opportunities for implementing on-site power generation systems. Within the treatment process, the high flow rate of effluent is ...