Abstract: Field measurements of velocity and salinity on a transverse cross section of a straight reach in the upper Conwy estuary have been used to evaluate the temporal and intratidal variations of the transverse and vertical shear ...

Abstract: Measurements of turbulent fluctuations of horizontal and vertical components of velocity and of suspended solids concentration in the region of 0.50 to 1.25 m above the bed have been made in the upper reaches of the Conwy ...

Abstract: Modern water treatment must maintain an acceptable balance between the microbial safety of potable water supply, the costs of treatment, and the formation of potentially harmful disinfection by-products (DBPs). In order ...

Abstract: Field measurements have been made of the turbulent fluctuations of the longitudinal and vertical components of velocity by using an electromagnetic flowmeter in a partially mixed reach of the Great Ouse estuary. An error ...

Abstract: The arch, as a structural element, has been used since ancient times, originally in stone or timber, more recently in reinforced concrete or steel. However, the more modern materials involving steel and concrete are highly ...

Abstract: A number of computer packages have been developed for modeling chlorine decay in water distribution networks. However, there is uncertainty as to the kinetic model that they should use for the decay mechanism. This paper ...

Abstract: The investigations reported relate to a series of hydrodynamic and fluorometric tracing experiments carried out in the U.K. Coastal Research Facility, located at H. R. Wallingford Ltd. Detailed measurements were made to ...

Abstract: An experimental study has been undertaken within the U.K. Coastal Research Facility (CRF), located at HR Wallingford Ltd. Detailed measurements were made to examine the on–off shore spreading of a solute, mostly inside the ...

Abstract: Mathematical models of chlorine concentration in water distribution systems require the bulk decay coefficient to be quantified. The coefficient needs to be determined with respect to independent variables if models are ...