Search
Now showing items 1-6 of 6
Crack Initiation In Grain Boundaries Under Conditions of Steady-State and Cyclic Creep
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Nucleation of intergranular cracks during steady-state and cyclic creep is analyzed in detail. The basis of the analysis is that grain boundary sliding produces stress concentrations at inclusions, ...
Deposition Results of a Transpiration Air-Cooled Turbine Vane Cascade in a Contaminated Gas Stream
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The experimental data are presented on the deposition of particulate on transpiration air-cooled turbine vanes operating in a cascade for a series of tests using distillate fuel contaminated ...
Three Dimensional Characteristics of Turbulent Wakes Behind Rotors of Axial Flow Turbomachinery
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Analytical and experimental investigations of the characteristics of three-dimensional turbulent wakes downstream of a turbomachinery rotor are reported in this paper. An approximate quasi-three-dimensional ...
Wake Behavior in the Presence of Free Stream Turbulence
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effect of free stream turbulence on the characteristics of a turbulent wake developed from the trailing edge of a thin and smooth flat plate was studied analytically and experimentally. ...
A Theoretical Investigation on the Structure of Fan Wakes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An analytical study is presented of the mean and turbulent characteristics of axial turbulent wakes behind a rotating fan. Simplified solutions are presented governing the mean radial and axial ...
An Experimental Study of Local Wall Shear Stress, Surface Static Pressure, and Flow Visualization Upstream, Alongside, and Downstream of a Blade Endwall Corner
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The experimental study reported in this paper was performed to acquire information on the distribution of wall shear stress and surface static pressure in a blade endwall corner. The blade ...