Search
Now showing items 1-6 of 6
A Stand-Alone Hybrid Photovoltaic, Fuel Cell, and Battery System: Case Studies in Jordan
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: The main purpose of this study is to investigate the feasibility of using a hybrid photovoltaic (PV), fuel cell (FC), and battery system to power different load cases, which are intended to be used at the Al-Zarqa governorate ...
Optimization of Kaplan Hydroturbine at Very Low Head With Rim-Driven Generator
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: The objective of the paper is to study the design and optimization of Kaplan hydroturbines for a very low head (less than 3 m), with a particular emphasis on the use of rim-drive electrical generators. The work is based ...
Utilization of Hydroturbines in Wastewater Treatment Plants
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: Wastewater treatment plants (WWTPs) are a significant energy consumer, yet there are several opportunities for implementing on-site power generation systems. Within the treatment process, the high flow rate of effluent is ...
Power Generation and Oxygen Transfer Analyses for Micro Hydro-Turbine Installed in Wastewater Treatment Aeration Tank
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study targets one of the major energy consumers in the U.S. It suggests a new mechanical system that can recover a portion of the energy in Wastewater Treatment Plants (WWTPs). The proposed system entails a hydro-turbine ...
The Power Reclamation of Utilizing Micro-Hydro Turbines in the Aeration Basins of Wastewater Treatment Plants
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Upgrading the aeration basin technology can improve the oxygen transfer efficiency (OTE), while keeping the energy consumption at its minimum level. Therefore, this paper introduces a new idea of installing micro-propeller ...
Investigation of Horizontal Micro Kaplan Hydro Turbine Performance Using Multi-Disciplinary Design Optimization
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study investigates performance-based design optimization for a Kaplan hydro turbine at a maximum water head of 2.6 m (8.5 ft), a micro-sized horizontal Kaplan turbine with 7.6 cm (3.0 in) diameter that has fixed blades ...