Search
CSV
RISVibration of Cams Having Two Degrees of Freedom
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The vibration analysis of cam-follower systems is extended to models having two degrees of freedom. Two models are considered, one in which the cam support is rigid and the follower has two ...
Discussion: “The Influence of Linear and Rotating Motions on the Friction of Polymers” (Briscoe, B. J., and Stolarski, T. A., 1981, ASME J. Lubr. Technol., 103, pp. 503–507)
Publisher: The American Society of Mechanical Engineers (ASME)
Fracture of Abrasive Grain in Grinding
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The fracture strength of single grits of alumina abrasive grain, as observed while cutting mild steel, was measured as a function of the grain depth of cut, the tangential force during cutting, ...
Discussion: “Surface Topography Changes in Polymer-Metal Sliding—II” (Jain, V. K., and Bahadur, S., 1983, ASME J. Lubr. Technol., 105, pp. 526–531)
Publisher: The American Society of Mechanical Engineers (ASME)
Discussion: “The Unlubricated Sliding Wear Behavior of Polyetheretherketone Against Smooth Mild-Steel Counterfaces” (Ovaert, T. C., and Cheng, H. S., 1991, ASME J. Tribol., 113, pp. 150–157)
Publisher: The American Society of Mechanical Engineers (ASME)
Discussion: “On the Mechanics of the Grinding Process Under Plunge Cut Conditions” (Hahn, R. S., 1966, ASME J. Eng. Ind., 88, pp. 72–79)
Publisher: The American Society of Mechanical Engineers (ASME)
The Wear of Polymers Sliding on Polymeric Films Deposited on Rough Surfaces
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The single-pass, transfer wear of LDPE, PVC, and PCTFE was studied as a function of the roughness of the steel counterface, and the presence or absence of a polymeric coating. A 50 nm thick ...
Depth of Penetration as a Predictor of the Wear Polymers on Hard, Rough Surfaces
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Polymers were slid on rough, hard surfaces with normal loads which caused full penetration (real and apparent areas equal) and partial penetration (real less than apparent area). SEM photographs ...
Polymers in Friction Assemblies of Machines and Devices: A Handbook
Publisher: The American Society of Mechanical Engineers (ASME)