Abstract: In the present paper, two lattice geometries suitable for near surface and double wall cooling were developed and tested. The first type of unit cell consisted of six ligaments of 0.5 mm diameter joined at a common vertex ...

Abstract: Microchannel manufacturing is one of the fastest growing areas in advanced manufacturing with numerous applications, including turbine blade cooling structures, compact microchannel heat exchangers, and electronic cooling ...

Abstract: Present paper developed a series of additively manufactured parallel cooling channels with streamwise wall jets inside, which could be suitable for double-wall and near-wall cooling configurations in gas turbine hot section ...

Abstract: Water flushing increases the urine transportation cost in a source-separation system, a new concept in sustainable management of municipal wastewater. This study investigates the reduction of water and the reconcentrations ...

Abstract: Transpiration cooling is able to provide more uniform coolant coverage than film cooling to effectively protect the component surface from contacting the hot gas. Due to numerous coolant ejection outlets within a small ...

Abstract: Increasing turbine inlet temperature is important for improving the efficiency of gas turbine engine. Elevated thermal load causes severe oxidation and corrosion for base alloy in turbine airfoils. To survive in this extreme ...

Abstract: The last 50 years has witnessed significant improvement in film cooling technologies while transpiration cooling is still not implemented in turbine airfoil cooling. Although transpiration cooling could provide higher ...

Abstract: An appropriate hybrid form of steel and fiber-reinforced polymer (FRP) bars in reinforced concrete members can prevent steel corrosion and ensure capacity and ductility. To investigate the impact resistance of concrete ...