Abstract: The mixture proportioning of heavy-weight concrete (HWC), as seen from the literature, is primarily based on a trial-and-error approach; even so, data from the literature indicate that obtaining high-slump mixtures for ...

Abstract: Cellulose-ether-based viscosity-modifying admixtures (VMAs), such as methyl hydroxyethyl cellulose (MHEC), are commonly used for improving the printability of 3D printed concrete. For ordinary portland cement (OPC)–based ...

Abstract: Accelerated weathering tests are commonly carried out to evaluate the resistance of porous materials to the damage induced by salt crystallization. A wide range of testing procedures have been prescribed by various standards ...

Abstract: The advent of concrete three-dimensional (3D) printing has opened new frontiers in architectural design, offering unprecedented geometric freedom and potential for material efficiency. While 3D-printed lattice beams are ...

Abstract: Sugarcane bagasse ash (SCBA) is an industrial by-product generated in large quantities from sugar industries employing the cogeneration process. It is commonly disposed of in landfills. The use of cogeneration plants, and ...

Abstract: Sugarcane bagasse ash is obtained as a by-product from cogeneration combustion boilers in sugar industries, and is reported to be a useful supplementary cementitious material in concrete. A clear evaluation of pozzolanic ...

Abstract: Sugarcane bagasse ash is obtained as a by-product from cogeneration combustion boilers in sugar industries, and is reported to be a useful supplementary cementitious material in concrete. A clear evaluation of pozzolanic ...

Abstract: The effects of an operating water head (OWH) and reduced graphene oxide (RGO) addition on the pervious concrete filter (PCF) and heavy metals interaction were investigated in the present study. Five simulated wastewaters ...