Search
CSV
RISStructure of Tip Clearance Flow in an Isolated Axial Compressor Rotor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Ensemble-averaged and phase-locked flow patterns in various tip clearances of two axial compressor rotors were obtained by aperiodic multisampling technique with a hot wire in the clearance and ...
Three-Dimensional Structure and Decay of Vortices Behind an Axial Flow Rotating Blade Row
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Detailed measurements were made of the three-dimensional turbulent flow field behind an axial-flow rotating blade row. The flow was surveyed at 15 radial locations and 70 circumferential sampling ...
Pressure Fluctuation on Casing Wall of Isolated Axial Compressor Rotors at Low Flow Rate
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The pressure fluctuations on the casing wall of two axial flow compressor rotors with various tip clearances have been analyzed by the use of two kinds of correlation functions. The behavior ...
Closure to “Discussion of ‘Pressure Fluctuation on Casing Wall of Isolated Axial Compressor Rotors at Low Flow Rate’” (1993, ASME J. Turbomach., 115, p. 27)
Publisher: The American Society of Mechanical Engineers (ASME)
Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Performance testing and detailed flow measurements were made in an axial compressor rotor with various tip clearances. The experiments were conducted on the condition of the same incidence angle ...
Closure to “Discussion of ‘Effects of Stream Surface Inclination on Tip Leakage Flow Fields in Compressor Rotors’” (1998, ASME J. Turbomach., 120, p. 693)
Publisher: The American Society of Mechanical Engineers (ASME)
Detection of a Rotating Stall Precursor in Isolated Axial Flow Compressor Rotors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Statistical characteristics of pressure fluctuation on the casing wall of two axial flow compressor rotors have been investigated experimentally to find a precursor of rotating stall. Near stall, ...
Closure to “Discussion of ‘Detection of a Rotating Stall Precursor in Isolated Axial Flow Compressor Rotors’” (1991, ASME J. Turbomach., 113, pp. 288–289)
Publisher: The American Society of Mechanical Engineers (ASME)
Effects of Stream Surface Inclination on Tip Leakage Flow Fields in Compressor Rotors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experimental and computational results of tip leakage flow fields in a diagonal flow rotor at the design flow rate are compared with those in an axial flow rotor. In the diagonal flow rotor, ...
Propagation of Multiple Short-Length-Scale Stall Cells in an Axial Compressor Rotor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Evolution and structure of multiple stall cells with short-length-scale in an axial compressor rotor have been investigated experimentally. In a low-speed research compressor rotor tested, a ...