Search
CSV
RISShear Lag Analysis of Thin-Walled Box Girders Adopting Additional Deflection as Generalized Displacement
Publisher: American Society of Civil Engineers
Abstract: The shear lag effect is one of the very important mechanical characteristics of thin-walled box girders and has been studied over several decades. However, the generalized displacement adopted in many papers is not very ...
Study on Thallium Bromide Radioactive Detector
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Thallium bromide (TlBr) is a compound semiconductor material, which can be used for X-ray and gamma-ray detectors and can be used at room temperature. It has excellent physical properties, high atomic number and density, ...
Study on Thallium Bromide Radioactive Detector
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: Thallium bromide (TlBr) is a compound semiconductor material, which can be used for X-ray and gamma-ray detectors and can be used at room temperature. It has excellent physical properties, high atomic number and density, ...
The Study of Nanosized Cu–Mn Precipitates Contribution to Hardening in Body Centered Cubic Fe Matrix
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In order to study the contribution of manganese (Mn) atoms in copper (Cu) precipitates to hardening in body centered cubic (BCC) structure iron (Fe) matrix, the interactions of a 1/2 〈111〉 {110} edge dislocations with ...
Turbulent Heat and Mass Transfer Across a Hollow Fiber Membrane Tube Bank in Liquid Desiccant Air Dehumidification
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The fluid flow and conjugate heat and mass transfer across a hollow fiber membrane tube bundle used for liquid desiccant air dehumidification are investigated. In this process, humid air flows ...
Reservoir and Wellbore Flow Coupling Model for Fishbone Multilateral Wells in Bottom Water Drive Reservoirs
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Nowadays, different types of complex production wells are applied in challenging reservoirs in order to maximize oil recovery. A representative application is the fishbone multilateral horizontal wells, which have advantages ...
Vertical Profiles of Aerosol Composition over Beijing, China: Analysis of In Situ Aircraft Measurements
Publisher: American Meteorological Society
Abstract: Aerosol samples were collected over Beijing, China, during several flights in November 2011. Aerosol composition of nonrefractory submicron particles (NR-PM1) was measured by an Aerodyne compact time-of-flight aerosol mass ...
Effects of Electropulsing Treatment on the Element Diffusion Between Ti6Al4V and Commercially Pure Titanium
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Previous studies show that the phase transition temperature of Ti6Al4V can be effectively reduced by electropulsing treatment, which may be related to the promotion effect of current on element diffusion. In order to verify ...
K-Edge Measurement Technology Simulation Model Design
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The K-edge technique is a nondestructive analysis (NDA) method that provides key data for nuclear material accountancy, mainly for the measurement of U and Pu concentrations in spent fuel reprocessing processes, with an ...
Research on the Impact of Cosmic Ray Induced Neutron Background Based on Nuclear Safeguards Equipment
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Neutron detection technology is one of the most commonly used techniques for nondestructive analysis of nuclear materials in nuclear safeguards and verification. During the neutron detection measurement of nuclear materials, ...