Search
CSV
RISElectroplastic Modeling of Bending Stainless Steel Sheet Metal Using Energy Methods
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Automotive manufacturers are continuously striving to meet economic demands by designing and manufacturing more efficient and better performing vehicles. To aid this effort, many manufacturers are ...
On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex Geometries—Part 1: Need, Methodology, and Standardization
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The objectives of this paper are to qualitatively assess the inadequacies of the current manner of tool wear quantification and consequently to suggest/develop a more comprehensive approach for ...
Use of Fused Deposition Modeling of Polyphenylsulfone for Centrifugal Casting of Polyurethane: Material, Surface, and Process Considerations
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: For the development of a rotational symmetrical polyurethane part with a steel reinforcement, a requirement/constraint driven approach to process design has been taken. In this approach a scale ...
Several Factors Affecting the Electroplastic Effect During an Electrically-Assisted Forming Process
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Recent development of electrically-assisted manufacturing (EAM) processes proved the advantages of using the electric current, mainly related with the decrease in the mechanical forming load and ...
The Correlation of the Volumetric Wear Rate of Turning Tool Inserts With Carbide Grain Sizes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The objective of this paper is to analyze the effect of different carbide grain sizes on the tool material volume worn away from straight tungsten–carbide–cobalt (WC–Co) turning inserts. A previously developed metrology ...
Electrically-Assisted Forming of Magnesium AZ31: Effect of Current Magnitude and Deformation Rate on Forgeability
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Currently, the automotive and aircraft industries are considering increasing the use of magnesium within their products due to its favorable strength-to-weight characteristics. However, the ...
Quality and Inspection of Machining Operations: CMM Integration to the Machine Tool
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Dimensional measurement feedback in manufacturing systems is critical in order to consistently produce quality parts. Considering this, methods and techniques by which to accomplish this feedback ...
Quality and Inspection of Machining Operations: Tool Condition Monitoring
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Tool condition monitoring (TCM) is an important aspect of condition based maintenance (CBM) in all manufacturing processes. Recent work on TCM has generated significant successes for a variety ...
On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex Geometries—Part II: Experimental Investigation and Validation on Ti-6Al-4V
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In part 1, traditional methods of tool wear characterization were qualitatively assessed, and consequently a volumetric approach of wear quantification was developed, standardized, and evaluated ...
Evaluating the Use of Artificial Neural Networks and Graph Complexity to Predict Automotive Assembly Quality Defects
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents the use of subassembly models instead of the entire assembly model to predict assembly quality defects at an automotive original equipment manufacturer (OEM). Specifically, artificial neural networks ...