Abstract: Thin-electrolyte anode-supported solid oxide fuel cells (YSZ/NiO–YSZ) were fabricated for intermediate-temperature operation using electrophoretic deposition (EPD). During cosintering, the half-cells ...

Abstract: This study reports on the microstructure and mechanical properties of titanium diboride (TiB2) that was rapidly consolidated via plasma pressure compaction (P2C®). Titanium diboride powder ...

Abstract: This study reports the findings of an experimental investigation for alkali silica reaction (ASR) between reactive aggregates and the geopolymer matrix. Specimens were prepared using one Class C and two Class F fly ash ...

Abstract: Electrokinetic nanoparticle (EN) treatments were employed to mitigate corrosion in reinforced concrete. In this approach an electric field was used to drive pozzolanic nanoparticles through the capillary pores of concrete ...

Abstract: Microstructural damage induced by sulfate attack in concrete is a cause of primary concern in building foundations and other structures. Most research focuses on prevention. In contrast, the concept of damage recovery has ...

Abstract: The durability of steel reinforced-concrete specimens made from three alkali-activated fly ash (FA) stockpiles and ordinary portland cement (OPC) in cyclic wet-dry chloride environment was evaluated over a period of 12 ...

Abstract: Additive manufacturing (AM) provides tremendous advantage over conventional manufacturing processes in terms of creative freedom, and topology optimization (TO) can be deemed as a potential design approach to exploit this ...

Abstract: In the present study, the effect of high-volume fly ash blending in the concentration of 15%, 25%, 35%, 45%, and 55% with different effective water-to-cement (W/C) ratios has been investigated for rheology, compressive ...