Search
CSV
RISCharacterization of Mechanically Enhanced FRP Bonding System
Publisher: American Society of Civil Engineers
Abstract: Despite extensive research on externally bonded fiber-reinforced polymer (EB-FRP) for rehabilitation of concrete structures in the past two decades, the industry has been slow to embrace the technology owing to some difficult ...
Postfailure Analysis of Slopes by Random Generalized Interpolation Material Point Method
Publisher: ASCE
Abstract: In this paper, the generalized interpolation material point (GIMP) method will be utilized to simulate the postfailure behavior of slopes that accounts for spatial variability. Because the spatial variability of soil has ...
Transient Convective Heat Transfer of Air Jet Impinging Onto a Confined Ceramic-Based MCM Disk
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Transient heat transfer behavior from a horizontally confined ceramic-based MCM disk with jet impingement has been systematically explored. The relevant parameters influencing heat transfer performance ...
A Novel Semi-empirical Model for Evaluating Thermal Performance of Porous Metallic Foam Heat Sinks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A novel semi-empirical model with an improved single blow method for exploring the heat transfer performance of porous aluminum-foam heat sinks in a channel has been successfully developed. The ...
Crack Extension Resistance Curve of Concrete Considering Variation of FPZ Length
Publisher: American Society of Civil Engineers
Abstract: Owing to its importance in evaluating the fracture behavior of concrete, the crack extension resistance curve of concrete has been widely studied, both experimentally and theoretically. In this paper, a numerical approach ...
Reliability of Shape Factors for Bearing Capacity of Square Footings on Spatially Varying Cohesive Soils
Publisher: ASCE
Abstract: Shape factors traditionally are used to relate the bearing capacity of square, rectangular, and/or circular footings to that of strip footings in geotechnical foundation designs, in order to take account of additional ...
Model Test Analysis of Excess Pore Water Pressure during the Sinking of a Pipe Pile with a Group of Holes
Publisher: American Society of Civil Engineers
Abstract: To investigate the law that governs changes in excess pore water pressure during the sinking of a pipe pile with a group of holes, excess pore water pressure is monitored during the process of sinking a pile between a pipe ...
Experimental Study of Seismic Mitigation of a Large-Span Cable-Stayed Bridge with Elastic Cables by Shaking Table Test
Publisher: ASCE
Abstract: Elastic cables have the advantages of desirable seismic mitigation effect, low cost, and convenient installation, and have been used widely in low-to-mid-span bridges. However, their utilization in long-span cable-stayed ...
Cooling Performance of Using a Confined Slot Jet Impinging onto Heated Heat Sinks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A series of experimental investigations on the studies related to transient- and steady-state cooling performance from the horizontally heated heat sinks with a confined slot jet impingement have ...
The Deformation of an Erythrocyte Under the Radiation Pressure by Optical Stretch
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, the mechanical properties of erythrocytes were studied numerically based upon the mechanical model originally developed by Pamplona and Calladine (ASME J. Biomech. Eng., 115, p. ...