Abstract: This paper describes the design of a haptic system that allows the interactive modification of cutter orientation during five-axis finishing cuts with the aim of improving the surface finish ...

Abstract: This paper reports a new method for 3D shape classification. Given a 3D shape M, we first define a spectral function at every point on M that is a weighted summation of the geodesics from ...

Abstract: We investigate how to define a triangulated ruled surface interpolating two polygonal directrices that will meet a variety of optimization objectives which originate from many CAD/CAM and geometric ...

Abstract: A common operation in clothing and shoe design is to design a folding pattern over a narrow strip and then superimpose it with a smooth surface; the shape of the folding pattern is controlled ...

Abstract: Unconfined compressive strength (UCS) of synthetic biochar mixed clays (BMC) treated with lime-GGBS has been investigated. Biochar utilized in this study was produced from the slow pyrolysis of green waste residue. Treated ...

Abstract: The fluid flow and conjugate heat and mass transfer across a hollow fiber membrane tube bundle used for liquid desiccant air dehumidification are investigated. In this process, humid air flows ...

Abstract: The erosion of a gas well relief line elbow under supercritical conditions must be investigated, because under these conditions, it may be pierced within a few minutes, which may significantly affect control safety and ...