Search
CSV
RISBelt Forces With Grinding
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper investigates belt forces in abrasive belt grinding. The distribution of normal and tangential belt forces are determined analytically and experimentally for belt grinding with both a ...
Determination of the Load Distribution in a Threaded Connector Having Dissimilar Materials and Varying Thread Stiffness
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A modified spring model was developed to predict the load distribution in the threaded portion of a connector. Distinction was made between a compression case (nut and bolt) and a tension ...
Belt Forces and Surface Model for a Cloth-Backed and a Rubber-Backed Flat Belt
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The normal and tangential belt forces for two types of flat belts are measured and compared. From friction theory, it was assumed that the actual contact area A a is proportional to normal ...
Discretization Pressure-Wear Theory for Bodies in Sliding Contact
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A theory is presented for studying contact pressure and wear distributions for bodies in sliding contact. This theory can be used in designing machine elements for improved wear resistance and ...
An Investigation of Stresses in Bolted Connectors for Marine Risers
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents a procedure on the finite element method for analyzing a bolted flange connector and compares this method with three traditional approaches. The finite element method considers ...
Effect of Clearance on Rotary Rock Bit Journal Bearing Contact Stress
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents a numerical method for analyzing the effect of clearance on closely conforming rotary rock bit journal bearings. The modified Boussinesq point-force displacement influence ...
The Effect of Surface Depressions on Conformal and Nonconformal Contact Pressure Distributions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents a numerical method for analyzing the stress concentration around one or several shallow longitudinal surface depressions. The modified iterative method and modified influence ...
Experimental Determination of the Roller Chain Load Distribution
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental study was conducted to determine the effect of elastic properties, geometric variations, and lubrication on roller chain load distribution. Comparison was made with the theoretical ...
Toothed Belt-Load Distribution
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A mathematical model was developed to study the effect on belt load distribution of belt material properties, pitch variations, friction force, and pulley rotation. Results are presented which ...
An Experimental Study of Rotor-Filter Pump Performance
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The performance of a rotor-filter pump has been studied experimentally. To develop an understanding of pump performance, and in particular to discern the mechanism of hydraulic pulsing, flow ...