Abstract: Based on the general theory of thin plates and shells previously developed by the first author, which holds also for oblique coordinate system, the problem of buckling of simply supported ...

Abstract: An prototype of an integrated CAD/CAPP system named CIMS has been developed. The sequence of machine tools and the machining sequence are determined by the CIMS based on the models of the ...

Abstract: A numerical modeling method for plane strain orthogonal cutting in steady state is developed on the basis of the rigid-plastic finite element method. The methods for determining the material ...

Abstract: This paper deals with the problem of optimizing the number of passes required together with the cutting speed, the feed, and the depth of cut at each pass for a given total depth of cut ...

Abstract: An elastoplastic analysis of hydrostatic extrusion is made using the finite element method. The effect of frictional coefficient on the spread of plastic zone, the pressure-displacement curve, ...

Abstract: A milling cutter temperature measuring technique was devised using garter spring pickups and standard thermocouples positioned at the back of inserts. Temperature signals as many as eight teeth ...

Abstract: For the reliable operation of bellows under cyclic loadings at high temperatures, a rational evaluation method of life of bellows would be needed. Authors investigated simplified analysis methods ...

Abstract: An analytical method applying a chance-constrained programming concept is proposed to determine the optimum cutting conditions considering the probabilistic nature of the objective function and ...