Search
Now showing items 1-10 of 25
Operating Experiences and Measurements on Turbo Sets of CCGT-Cogeneration Plants in Germany
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Five closed-cycle gas turbine cogeneration plants have been built and commissioned in the Federal Republic of Germany. In all cases the working fluid was air. The facilities were designed as ...
Twenty-Five Years of Operating Experience With the Coal-Fired, Closed-Cycle Gas Turbine Cogeneration Plant at Coburg
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The only commercially running closed-cycle gas turbine in the world delivering electricity as well as heat to a public utility and a heating network, is the heat and power station in Coburg, ...
Dynamic Behavior of a Solar-Heated Receiver of a Gas Turbine Plant
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The mainly nonstationary operation of a solar-heated receiver can be simulated with sufficient accuracy only if data about the dynamic behavior are available. For this reason, the dynamic behavior ...
Investigations on Impulse Blade Cascades with Medium Deflection
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The transformation of energy in the stages of high-reaction axial compressors can be considerably increased if the rotor blading consists of tandem cascades. This also involves aerodynamically ...
Measurements of the Boundary Layer Development along a Turbine Blade with Rough Surfaces
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: During the operation of turbines the surfaces of the blades are roughened by corrosion, erosion and deposits. The generated roughness is usually greater than that produced by manufacture. The ...
Measurements of the Performance of an Air Turbine Stage at Positive and Negative Mass Flow and Rotational Speed (Four-Quadrant Characteristics)
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In the mass flow range −1.3 ≤ m/m N ≤ + 1.3 (N = nominal point) and in the speed range −1.0 ≤ n/n N ≤ +1.0 the four-quadrant characteristic of a turbine stage was completely measured. ...
Part-Load Behavior of a Solar-Heated and Fossil-Fueled Gas Turbine Power Plant
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Solar energy can be converted effectively into electrical or mechanical energy. The radiant heat of the sun is collected by a parabolic dish, concentrated intensely, and reflected into a cavity ...
Discussion: “Surge and Rotating Stall in Axial Flow Compressors—Parts I and II” (Greitzer, E. M., 1976, ASME J. Eng. Power, 98, pp. 190–211)
Publisher: The American Society of Mechanical Engineers (ASME)
Discussion: “A Method of Measuring the Three-Dimensional Mean Flow and Turbulence Quantities Inside a Rotating Turbo-machinery Passage” (Gorton, C. A., and Lakshminarayana, B., 1976, ASME J. Eng. Power, 98, pp. 137–144)
Publisher: The American Society of Mechanical Engineers (ASME)
Back Flow in Turbines of Nuclear Closed-Cycle Gas Turbine Plants in Case of Circuit Pipe Rupture
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: For operation of a gas turbine in single-cycle arrangement with a high-temperature reactor, rupture of a main circuit pipe has to be included in the safety considerations. In the event of ...