Search
CSV
RISConformal Theoretical Modeling of Arbitrary Shape Flexible Electronic Sensors Mounted Onto General Curved Surface Substrates
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Stretchable and flexible electronic sensors have been attracted to novel applications due to their conformal integration onto complex curved surfaces, whereas the mounting strains generated by the geometric mismatch of ...
Conformal Theoretical Modeling of Arbitrary Shape Flexible Electronic Sensors Mounted Onto General Curved Surface Substrates
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Stretchable and flexible electronic sensors have been attracted to novel applications due to their conformal integration onto complex curved surfaces, whereas the mounting strains generated by the geometric mismatch of ...
Thermoelastohydrodynamic Mixed Lubrication of Combined Rod Seals Operating at High Pressures and Speeds: Mathematical Modeling and Numerical Analysis
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Thermoelastohydrodynamic (TEHD) mixed lubrication characteristics of a step-combined rod seal under high-pressure and high-speed conditions are analyzed in this article. A novel TEHD mixed lubrication model for combined ...
Effects of Axial Deformation Load on In-Plane Instability of U-Shaped Bellows
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The in-plane instability pressure of U-shaped bellows can be calculated by Expansion Joint Manufacturers Association standards formulas where only the internal pressure load is taken into account, ...
Modal Analysis and Local Stiffness Optimization for Body-in-white of Car
Publisher: American Society of Civil Engineers
Abstract: Using preprocessing software Hypermesh and FEA software MSC. Nastran, the detailed finite element model of car body-in-white (BIW) was established based on the theory of finite element. Finite element modal analysis and ...
A Vibration-Assisted Separation Method for Constrained-Surface-Based Stereolithography
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: For the bottom-up based stereolithography (SL) process, a separation process is required to detach the newly cured layer from the constrained surface in the fabrication process. Excessive separation force will cause damage ...