Search
CSV
RISA Study of Build Edge Profile for Prediction of Surface Roughness in Fused Deposition Modeling
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Surface roughness prediction studies in fused deposition modeling (FDM) process are usually based on a perimeter profile of each deposited layer. This study categorizes three types of build edge profile composed of perimeter, ...
Analytical Solution for Three Dimensional, Unsteady Heat Conduction in a Multilayer Sphere
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An analytical solution has been obtained for the transient problem of threedimensional multilayer heat conduction in a sphere with layers in the radial direction. The solution procedure can be applied to a hollow sphere ...
Performance Evaluation of the Data Clustering Techniques and Cluster Validity Indices for Efficient Toolpath Development for Incremental Sheet Forming
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The goal of current research is to compare the data clustering techniques and cluster validity indices for geometrical feature extraction using point cloud. Here, the point clouds are generated by slicing of the computer-aided ...
Thermo-Mechanical Safety Analyses of Preliminary Design Experiments for 238Pu Production
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Safety analyses at the high flux isotope reactor (HFIR) are required to qualify experiment targets for the production of plutonium-238 (238Pu) from neptunium dioxide/aluminum cermet (NpO2/Al) pellets. High heat generation ...
Thermomechanical Safety Analyses for a 238Pu Production Target at the HFIR
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Safety analyses at the high flux isotope reactor (HFIR) are required to qualify irradiation of production targets containing neptunium dioxide/aluminum cermet (NpO2/Al) pellets for the production of plutonium-238 (238Pu). ...
Thermomechanical Safety Analyses for a 238Pu Production Target at the HFIR
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: Safety analyses at the high flux isotope reactor (HFIR) are required to qualify irradiation of production targets containing neptunium dioxide/aluminum cermet (NpO2/Al) pellets for the production of plutonium-238 (238Pu). ...