Abstract: An approximate theoretical analysis is presented for the determination of stress concentration factors in thick walled cylinders with sideholes and crossholes. The cylinders are subjected to both ...

Abstract: The residual ductility and the residual stresses in formed heads, hemispherical and torispherical, are calculated using computer techniques: a program for plastic loading and a separate program ...

Abstract: A plastic stress analysis was made of the conical cup problem using the maximum shear stress criterion. Limiting diameter ratios were determined for both perfect lubrication and friction conditions. ...

Abstract: The extended Kantorovich method is used to obtain solutions for a large number of previously unsolved elastic buckling problems of thin rectangular plates. In the present work, this method is ...

Abstract: Plastic collapse of ellipsoidal head pressure vessels is considered. The heads have an inside semimajor axis to semiminor axis ratio of 2:1. Diameter to thickness ratios (D/t) vary from 20–2000. ...

Abstract: Limit analysis provides an alternative to incremental elastic-plastic analysis for determining a limit load. The limit load is obtained from the lower and upper-bound theorems. These theorems, ...

Abstract: Yielding in a crystal structure occurs with plastic slip on preferential planes. It is similar to yielding on maximum shear planes in an isotropic continuum, but in this case the slip is ...