Search
CSV
RISOptimum Suppression of Fluid Forces Acting on a Circular Cylinder
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The objective of this paper is to investigate the suppression of the fluid forces acting on a circular cylinder (hereafter called the main cylinder) by controlling the flow around it. Flow ...
Effect of Free-Stream Turbulence on Characteristics of Fluctuating Forces Acting on Two Square Prisms in Tandem Arrangement
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effect of the addition of the turbulence intensity to the free stream on the characteristics of the bistable flow which takes place around two square prisms in tandem arrangement was ...
Fluctuating Forces on a Rectangular Prism and a Circular Cylinder Placed Vertically in a Turbulent Boundary Layer
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental study was conducted to investigate the fluctuating force generated by the shedding of vortices from a three-dimensional bluff body placed vertically in a turbulent boundary layer. ...
Flow Around a Normal Plate of Finite Width Immersed in a Turbulent Boundary Layer
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental investigation was carried out on the flow around a normal plate of finite width mounted on a smooth plane wall along which a turbulent boundary layer was fully developed. ...
Effect of a Vibrating Upstream Cylinder on a Stationary Downstream Cylinder
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The flow around two circular cylinders in tandem arrangement in uniform flow where the upstream cylinder is forcibly vibrated in direction normal to the approach flow was experimentally studied ...
A Study on Vortex Shedding From Spheres in a Uniform Flow
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Vortex shedding from spheres at Reynolds numbers from 3 × 102 to 4 × 104 in a uniform flow was investigated experimentally. Standard hot-wire technique were used to measure the vortex ...
Effective Thermal Diffusivity of Porous Media in the Wall Vicinity
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Transient heat transfer from an impulsively heated vertical constant heat flux plate embedded in a stationary saturated porous medium is studied experimentally and analytically to determine near-wall ...
A Two-Dimensional Numerical Investigation of Transient Heat Flux Gage Performance in Short-Duration Facilities
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Thin-film heat-flux gages have been used for the past fifty years in short-duration facilities (test times typically on the order of one to ten milliseconds) to measure local heat flux in a ...
Interference Between Two Circular Cylinders of Finite Height Vertically Immersed in a Turbulent Boundary Layer
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Measurements were made of the circumferential pressure distributions around two cylinders of finite height h and diameter d, spaced a distance s apart and vertically immersed in a turbulent ...
An Optimum Suppression of Fluid Forces by Controlling a Shear Layer Separated From a Square Prism
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper deals with the suppression of the fluid forces by controlling a shear layer on one side separated from a square prism. The control of the separated shear layer was established by ...