Search
Now showing items 1-5 of 5
Vortex Rope Formation in a High Head Model Francis Turbine
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Francis turbine working at off-design operating condition experiences high swirling flow at the runner outlet. In the present study, a high head model Francis turbine was experimentally investigated during load rejection, ...
Role of Chamfering Angles and Flow Through Slit on Heat Transfer Augmentation Behind a Surface Mounted Rib
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Detailed heat transfer and flow field investigations behind a surfacemounted slitted trapezoidal rib have been performed using liquid crystal thermography (LCT) and particle image velocimetry (PIV). In the accomplished ...
Transient Pressure Measurements on a High Head Model Francis Turbine During Emergency Shutdown, Total Load Rejection, and Runaway
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The penetration of intermittent wind and solar power to the grid network above manageable limits disrupts electrical power grids. Consequently, hydraulic turbines synchronized to the grid experience total load rejection ...
Experimental and Numerical Studies for a High Head Francis Turbine at Several Operating Points
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experimental and numerical studies on a high head model Francis turbine were carried out over the entire range of turbine operation. A complete Hill diagram was constructed and pressuretime measurements were performed at ...
Experimental Investigation of a High Head Francis Turbine During Spin No Load Operation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Water passes freely through a hydraulic turbine in the absence of power requirements or during maintenance of the transmission lines, spillways, or dam. Moreover, the turbine operates under noload conditions prior to ...