Abstract: The present paper introduces the analysis-led-design concept in attaining the thermal homogeneity at the exit section of a mixing chamber. Staggered holes (SH) chamber type is representing jet-in-crossflow (JICF) where ...

Abstract: The importance of gas turbine blades is to convert the thermal energy into shaft work output, which makes the turbine blades as one of the critical components of the gas turbines. Besides the mechanical stresses caused by ...

Abstract: This research provides an in-depth analysis of the flow around the rotor and in the wake of a single horizontal axis wind turbine (HAWT) model at different free stream velocities and tip speed ratios (TSRs). Moreover, it ...

Abstract: Prediction correlations of air bubble diameter and frequency in stagnant clean water were established. Eleven different orifice diameters were tested under flow rate of 0.05–0.15 SLPM. The resulted bubble size and frequency ...

Abstract: This research proposes an air-injection treatment for the cavitation phenomena in the Kaplan turbine. An unsteady numerical model is created to predict the cavitating flow through a 3-in. axial hydroturbine before and after ...