Search
CSV
RISResearch on Dynamic Characteristic of Marine Shafting-Oil Film-Stern Structure System
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The working conditions of the propulsion system of ships are affected by many factors and partially by hull deformations and lubricating oil film. In order to solve the problem of engineering application of reliability ...
Investigation on Shearing and Local Formability of Hot-Rolled High-Strength Plates
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In order to evaluate the shearing quality, the material inhomogeneity through thickness after shearing is introduced by the authors. This study investigates the shearing and local formability of hot-rolled high-strength ...
Multicondition Optimization and Experimental Measurements of a Double Blade Centrifugal Pump Impeller
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In order to improve internal unsteady flow in a doubleblade centrifugal pump (DBCP), this study used major geometric parameters of the original design as the initial values, heads at three conditions (i.e., 80% design flow ...
Stationary Planetary Waves Inferred from WINDII Wind Data Taken within Altitudes 90–120 km during 1991–96
Publisher: American Meteorological Society
Abstract: A climatology of stationary planetary waves (SPWs) in horizontal winds at latitudes 70°S?70°N and altitudes 90?120 km is obtained from Wind-Imaging Interferometer (WINDII) green line measurements in December?January and ...
An Improved Volume of Fluid Method for Two-Phase Flow Computations on Collocated Grid System
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An improved volume of fluid method called the accurate density and viscosity volume of fluid (ADV-VOF) method is proposed to solve two-phase flow problems. The method has the following features: ...
Test Method of the Mechanical Response Based on the Pavement Structure Model
Publisher: ASCE
Abstract: Corresponding experiments were designed and accomplished to obtain the authentic mechanical response mechanism of pavement under different loading conditions. Replicability and reproducibility of the experiments were ...
Relationship of Chemical Composition and Moisture Sensitivity in LiNixMnyCo1−X−YO2 for Lithium-Ion Batteries
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Chemical composition–moisture sensitivity relationship of LiNixMnyCo1−x−yO2 (NMC) cathode materials was investigated by exploring crystal structures, surface properties, and electrochemical performance behaviors of various ...
Optimization Design and Evaluation Analysis of Dynamic Straight-Right Lane at Signalized Intersection
Publisher: ASCE
Abstract: In the real urban road network example, the entrance lanes of signalized intersections adopt the form of straight-right lane, which will cause the phenomenon that straight-going vehicles in the straight-right lane stop and ...
Use of Polyurethane Precursor–Based Modifier as an Eco-Friendly Approach to Improve Performance of Asphalt
Publisher: ASCE
Abstract: With the rapid growth of traffic demands, the use of liquid chemical material instead of traditional modifier to prepare high-performance modified asphalt demonstrates dual values in environmental protection and performance ...