Abstract: To obtain the foil bearing characteristics, the fluid film pressure must be coupled with the elastic deformation of the foil structure. However, all of the structural models thus far have ...

Abstract: In the present study, the effects of the rotating direction on heat/mass transfer in an impingement/effusion cooling system were investigated. The experiments were carried out with three different ...

Abstract: The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter (Dh) of the square ...

Abstract: This study is to examine experimentally the effects of pin inclination and pin height-to-diameter ratio on the heat/mass transfer characteristics in a pin-fin channel with and without rotation. ...

Abstract: The present study investigates the effects of secondary flow due to angled rib turbulators on the heat/mass transfer in the square channels with channel rotation and bleed flow. The angle of ...

Abstract: In this study, the effects of bleed flow on heat/mass transfer in a rotating smooth square channel were investigated. The hydraulic diameter (Dh) of the channel was 40.0mm, and the diameter ...

Abstract: The present investigation provides detailed local heat/mass transfer and pressure drop characteristics in a matrix cooling channel, under rotating conditions. The matrix channel had cooling subpassages ...

Abstract: The present study investigated convective heat transfer inside a two-pass rectangular duct with guide vanes in the turning region. The objective was to determine the effect of the guide vanes ...