Abstract: The mixing moisture content (MMC) is an important mix design variable in pavement full-depth reclamation (FDR) with foamed asphalt. It has been known for many decades that MMC in the granular material subjected to foamed ...

Abstract: Water quality treatment via constructed storm-water wetlands (CSWs) is intimately linked to system hydraulics. Previous works have attempted to define the relationship between performance and wetland design variables ...

Abstract: Beaver Slide is on the Dalton Highway near 177.8 km (110.5 mi), and it is downhill when heading north. The road gradient is approximately 11% and the road prism is on a side hill. Each year, there are soft spots that usually ...

Abstract: This study investigated the curing mechanism of foamed asphalt mixes. Various laboratory strength and stiffness tests were performed on mixes with various asphalt and portland cement contents, and the specimens were subjected ...

Abstract: Beaver Slide is near 177.8 km (110.5 mi) on the Dalton Highway and the road gradient is approximately 11%, built on a hill side. Each year, soft spots, also commonly named as frost boils, were observed starting ...

Abstract: This paper summarizes the results of numerous simulations to assess the hydraulic performance of fully permeable highway shoulder retrofits designed to capture all the rainfall runoff falling onto conventional highway ...

Abstract: The California Department of Transportation has proposed to add a low amount of crumb-rubber modifier into dense-graded asphalt mixes, in addition to current policies of using gap- and open-graded mixes with a high content ...